42
2) Key switch
OFF----the switch is off and at this time the key can be taken out or inserted.
ON----The electric control return circuit is open and the running preparation is
finished after the liquid crystal display flicker four times.
For your safety, when operating on electric parts, please disconnect plugs. The
main return circuit still has voltage even the key is off.
WARNING:
Turn the key off and take it out before leaving the truck.
When carrying out the following operations a) and b), the safe return circuit of
the truck works. The truck is not allowed to work under such condition. Carry out
reset methods.
a) When the key is ON, forward and backward switch are operated. (Operate in other
gears except neutral gear).
b) When the key is ON, disconnect or connect battery plug.
Reset methods:
For a) :Put gears shifting switch in neutral position and switch the key to ON position
after switch it to OFF position.
For b): turn the key to OFF position and disconnect the plug. Then turn to the ON
position.
3) Acceleration knob
Step on the acceleration pedal, the integrated knob 1 is acceleration knob. Push
the integrated knob forward and the truck travels towards fork leading direction; step
on the brake pedal, push the knob towards the truck frame direction and the truck
travels towards fork trailing direction.
4) Steering wheel
Summary of Contents for green Series
