48
III. Operation of the truck
To keep the truck in good performance, use safely and working economically,
please follow the notes below.
1. Notes on new truck usage
Though the truck has experienced thoroughly adjust and test before delivery, the
truck need moderate operation in the first month (200 hours) until all parts of the
truck have full running-in time.
If the new truck works at bad environment at very first, the service life of the
truck will be shortened and the performance will experience bad impact.
CAUTION:
Pay attention to the following when the truck is run-in:
Do not operate the truck when the truck is heavy loaded or travelling with
high speed;
The operation shall be smooth, avoiding emergency gear shifting, emergency
braking, sharp turning and sudden acceleration;
During the running in period or after replacing the new brake friction plate,
the friction plate shall be fully run in to achieve the best braking effect.
2. Relationship between load and stability of truck
The truck balances the rear weight and load with the front wheel as the
supporting point. So to keep the balance, take care of the load’s barycenter.
When it is overloaded, the rear wheel will lift off, and the truck will overturn in
forward. Further more, the more the load’s barycenter towards to the fork arm, the
more heavily the load is. And so the relative goods’ weight should be reduced.
Load on rear wheel supporting point load weight
Summary of Contents for green Series
