Helicute H817, User Manual

6.3 ELECTRONIC PROTECTION SYSTEM

- Low-voltage protection: the VR-Racer is equipped with a system whereby, when the VR-Racer 

battery level is low, the control system will cut the power supply to the rotors. In this case, the 

battery will have to be recharged to r

esume flying.

6.5 ACROBATIC FLIGHT: FLIP & ROLL (360º)

Once you have experience at the contr

ols of flight of the 

VR-Racer you can continue to make 

progress and begin making amazing Flips & Rolls.

To perform a Flip & Roll in any of the speeds you can press the right control stick and then move it in 

any of the four directions to perform a Flip&Roll in this direction.

Once selected only you must quickly shift the right control stick to any direction to perform a 

Flip&Roll.

Note: it is not recommended to perform Flip&Roll close to objects or persons.

6.6 HEADLESS MODE FUNCTION

The VR-Racer c

omes equipped with a flight aid b

ased on the Compass, which can be enabled or disabled

The forward dir

ection will be fi

xed when we switch on the headless mode function. 

For example, if our VR-Racer

How to activate the headless mode?

6.4 MAINTAINING YOUR VR-RACER

1. Clean the VR-Racer with a clean, soft cloth.

2. Do not immerse the VR-Racer in water, or the electrical parts will be damaged. 

3. Check the component parts of the VR-Racer regularly, such as rotor blades, the chassis, motors, 

etc. If any of them is damaged or worn, please do not use it again until it has been repaired.

4. Carry out an automatic trim and reset fairly often.

5. Depending on the VR-Racer model you have purchases, if it has gears, we recommend that you 

lubricate them with a silicon-based lubricant fairly regularly, as in this way you will extend the useful 

life of the gears.

6. Check the VR-Racer battery charge regularly. If you are not going to use it for a while, ensure that 

it is charged and never store if after having discharged it.  

Preferably this function must be activated before take-off so that the forward direction is set correctly.

depending on the need. The function of this component is to set forward direction of your VR-Racer to a

static / fixed direction. 

 Which is the forward direction? 

 is pointing north when we activate the headless mode, this direction will be the forward direction at any time

 provided we do not deactivate the headless mode while we fly.  

 You must hold the button for 3 seconds after “Speed Selector”, then you will hear one “beep”, now the 

 headless mode is activated.