14
Before the placement of the collectors on
the support base, loose the screws of the
bottom plate E, so that the bottom fin of
the collector can pass easy between the
plates E and B.
The top plate (E) is fixed after the pla
-
cement of the collector(s).
Place and centralize the collector(s) on
the support base.
For the models 200,260 and 300, which
consist of two collectors, you must
connect them to each other by using
the pipe unions (12), supplied with each
appliance.
Secure the bottom part of the collector(s)
by screwing tightly the bottom plate E on
the plates B.
Screw tightly the top plate E, on the
plates B, securing the collector(s).
e
e
Z
20A
B
e
a
12
B
Installation instructions of the storage tank and collector
on the support base
