Operating
Energy Manager 1.3 - Instruction Manual
55
TIP
All possible event messages are explained in a separate reference
manual.
Events occurring during the runtime of the systems connected to the
Energy Manager can be observed on the LCD. The appropriate module
has to be selected and the error or event will be reported.
To display events, proceed as follows:
1.
In the
main menu
, select the module showing an event or error code,
e.g.
System
.
Figure 5-1 System error, example
2.
Confirm with
OK
.
3.
Select following submenu, e.g.
Info.
4.
Confirm with
OK
.
5.
Select
Error List
.
6.
Confirm with
OK
.
Event number and a short text explaining the event are displayed.
7.
If several events are displayed, you can scroll in the list with the
<down> key.
To delete an event from the list:
8.
Confirm with
OK
.
The event will no longer be displayed in the LCD display.
A message is sent to the RMS and the event is still active on the
RMS until it is cleared by the system.
How to display events