Helion conquest 10MT XB, Owner'S Manual

4

Notice

Your product is calibrated and tested at the factory prior to final packaging, 

some issues may arise during shipping and handling that can be easily 

resolved at home. For other adjustments it should be known that hobby 

grade radio controlled products such as this differ from toy grade, in that they 

are intended to be user-serviceable products where the user can program, 

disassemble and maintain their own product. We try our best to ensure the 

information you need to introduce you to this form of product ownership is 

available to you though this manual. Please see the troubleshooting guide at 

the back of this manual for assistance in resolving issues, either as they are 

experienced out of the box or as found after regular use. 

Note: Assuming your product functions properly as intended out of the box, the 

best thing you can do is pay close attention to how it feels, sounds and functions. 

This will help you identify problems later since you will have a reference of how the 

product is supposed to perform. 

If you require further information or assistance resolving a possible issue, 

please consult the warranty card included with your product.

Precautions

Although great for first time users, Helion RC products are indeed advanced 

radio controlled vehicles with sensitive electronics and moving parts capable 

of causing injury if used improperly. Always use caution and common sense 

as failure to operate your product in a safe and responsible manner can 

result in damage to the product or other properties. Therefore this product 

is not intended for use or maintenance by children without direct adult 

supervision. Helion RC and your hobby dealer shall not be liable for any loss 

or damages, whether direct, indirect, special, incidental, or consequential, 

arising from the use, misuse, or abuse of this product or any product required 

to operate or maintain it.

WARNING: ALWAYS KEEP LOOSE CLOTHING, HAIR, TOOLS OR OTHER MOVABLE 

OBJECTS AWAY FROM MOVING PARTS OF YOUR VEHICLE DURING SETUP AND 

CONFIGURATION. SPINNING TIRES CAN EXPAND AND MAKE CONTACT WITH SMALL 

TOOLS, OR HARDWARE AND SEND THEM FLYING AT HIGH SPEEDS RISKING 

INJURY TO YOU OR OTHERS AROUND YOU.

•  Your model can cause serious damage or injury so please use caution 

and courtesy when operating your model.

•  As a safety precaution, perform all transmitter and receiver adjustments 

with all parts of the vehicle off the ground. This ensures the complete 

control over the vehicle at all times during adjustments.

•  Do not operate your model near traffic, bystanders, parking areas, or any 

other area that could result in injury to people or damage to property.

•  If at any time during the operation of your model you observe any erratic 

or abnormal behavior of your model, immediately stop operation and 

bring the mode to a safe stop in a safe location to diagnose the problem.

•  Always power on your transmitter before turning your vehicle on.