background image

REPLACEMENT PARTS LIST

25

1/10th SCALE 2WD

MONSTER TRUCK

HLNA0646 ...........Servo Mount Set, (Ion MT)

HLNA0647 ...........Battery Strap Set, (Ion MT)

HLNA0648 ...........Rodend/Turnbuckle Set, Front, (Ion MT, SCT)

HLNA0649 ...........Gasket Set, Receiver Box, (Ion MT)

HLNA0650 ...........Camber Block and Skid Plate (Ion MT)

HLNA0651 ...........Shock Spacer Set (Ion MT)

HLNA0652 ...........Wheelie Bar Kit (Ion MT)

HLNA0653 ...........Shock Spacer Set, 10MT 2wd Elec MT

HLNA0654 ...........Rodend/Turnbuckle Set, (Ion MT, SCT)

HLNA0655 ...........Rodend/Turnbuckle Set, Rear, (Ion MT, SCT)

HLNA0684 ...........Intrusion 10MT XLR, 2wd EP MT (US)

HLNA0685 ...........Intrusion 10MT XLR, 2wd EP MT (INT)

HLNA0724 ...........Body, Blue (ION-MT)

HLNA0725 ...........Body, Orange (ION-MT)

HLNA0726 ...........Body, Clear (ION-MT)

HLNA0727 ...........Pinion Gear, 48P, 24T

HLNA0728 ...........Pinion Gear, 48P, 27T

HLNA0729 ...........LED Kit (ION-MT)

HLNA0730 ...........Owners Guide, Intrusion 10MT XLR

HLNA0731 ...........Quick-Start Guide, Intrusion 10MT XLR

KNNS0005 ..........HRS3.2 3Ch 2.4GHz Xenon (Xe) Transmitter

KNNS0008 ..........4Ch 2.4GHz Xenon (Xe) Receiver, AW

RDNA0048 ..........Reaktor Brushless ESC NS-50A WP-P

RDNA0049 ..........Reaktor BL Motor NS 3000kV 4-Pole

RDNA0098 ..........Superpax Batt, 8.4V 7C 3000 NiMH,Hump,HCT

RDNA0224...........Pinion Gear, 48P, Steel 24T

RDNA0227...........Pinion Gear, 48P, Steel 27T

RDNA0299 ..........Body Clips, Small Straight, Silver (10)

RDNA0300 ..........Body Clips, Sandard Straight, Silver (10)

RDNA0301 ..........Body Clips, Sandard Bent, Silver (10)

RDNA0302 ..........Body Clips, Large Straight, Silver (10)

RDNA5114 ...........Bearings, 5x8x2.5mm, Rubber Sealed (2)

RDNA5115 ...........Bearings, 5x10x4mm, Rubber Sealed (2)

RDNA5119 ...........Bearings, 10x15x4mm, Rubber Sealed (2)

HLNA0093 ...........Dog Bone Set, Front (DSC-2, DTR)

HLNA0101 ...........Outdrives Diff, F-R (10-US, ION)

HLNA0130 ...........Set Screws (SHSS), M3x3mm

HLNA0139 ...........Body Clips, Small

HLNA0140 ...........Body Clips, Large

HLNA0228 ...........Serrated Nuts, Flanged, M4x0.7x7mm

HLNA0252 ...........Servo, 6kg-WP, Standard

HLNA0273 ...........Tires, Mounted, Silver Wheels (IMT)

HLNA0275 ...........Wheels, Silver (IMT)

HLNA0276 ...........Tires And Foam (IMT)

HLNA0286 ...........Bearings, Rubber Sealed, 5x10x4mm

HLNA0287 ...........Bearings, Rubber Sealed, 10x15x4mm

HLNA0307 ...........Bulkhead Set, Front (10-ION)

HLNA0308 ...........Camber Block Set, F-R (10-ION)

HLNA0313 ...........Hub Set, Rear (10-ION)

HLNA0314 ...........Spindle And Carrier Set, F (10-ION)

HLNA0315 ...........Wheel Hex Set, 12mm (10-ION)

HLNA0319 ...........Steering Assembly Plastic (10-ION)

HLNA0325 ...........Ball Studs, 4.8x10mm (10-ION)

HLNA0326 ...........Hinge Pin Set (10-ION)

HLNA0327 ...........Axles, Front (10-ION)

HLNA0328 ...........Brace, Suspension, Front (CB)

HLNA0329 ...........Steering Assembly Metal (CB)

HLNA0331 ...........Shock Plastic Kit (CB)

HLNA0332 ...........Shock Seal Rebuild Kit (10-ION)

HLNA0335 ...........Motor Plate And Motor Spacer (10-ION)

HLNA0336 ...........Slipper Plates And Spring (10-ION)

HLNA0337 ...........Slipper Pads (10-ION)

HLNA0338 ...........Transmission Case (10-ION)

HLNA0340 ...........Gear Set, Internal Diff, Metal (10-ION)

HLNA0341 ...........Shaft Set, Transmission (10-ION)

HLNA0342 ...........Gear Cover (10-ION)

HLNA0349 ...........Servo Mounts And Horns (10-ION)

HLNA0352 ...........Ball Studs, 4.8x5mm

HLNA0370 ...........Plain Nuts, M3x0.5x5.5mm, BK

HLNA0371 ...........Locknuts, M3x0.5x5.5mm, BK

HLNA0372 ...........Locknuts, M4x0.7x7.0mm, BK

HLNA0387 ...........Suspension Arms, F/R (VSC)

HLNA0397 ...........Bearings, Rubber Sealed, 5x8x2.5mm

HLNA0398 ...........Ball Stud Spacers, 3x2mm

HLNA0399 ...........Washers, 3x8x0.5mm

HLNA0408 ...........Shock Bodies, F-R (VSC)

HLNA0409 ...........Shock Shafts, F-R (VSC)

HLNA0410 ...........Spring Set, F-R (VSC)

HLNA0411 ...........Metal Differential (10-ION)

HLNA0412 ...........Metal Idler Gear (10-ION)

HLNA0413 ...........Metal Input Gear (10-ION)

HLNA0422 ...........Rear Axle Cups (10-ION)

HLNA0428 ...........Differential Shims (10-ION)

HLNA0431 ...........E-Clips, 8mm

HLNA0467 ...........D Pivot Block, Aluminum (Ion)

HLNA0568 ...........Wall Charger, NiMH, 9V-600mA 7C HCT (US)

HLNA0569 ...........Wall Charger, NiMH, 9V-600mA 7C HCT (INT)

HLNA0640 ...........Chassis, Main, (Ion MT)

HLNA0641 ...........Shock Towers, F-R, (Ion MT)

HLNA0642 ...........Body Mount Set, (Ion MT

HLNA0643 ...........Bumpers and LED Bars, F-R (Ion MT)

HLNA0644 ...........ESC Tray and Cage, RX Box Lid (Ion MT)

HLNA0645 ...........Chassis Brace, F-R, Lower (Ion MT)

Summary of Contents for Intrusion XLR HLNA0684





























Reviews: