Helion Invictus 10MT, Owner'S Manual And Exploded Views

...REAKTOR ESC PROGRAMMING TREE AND PARAMETERS

OPTIONAL ACCESSORIES FOR YOUR REAKTOR BRUSHLESS SYSTEM

12

Use the tabel below to better understand the programming process. This should help you navigate thorugh the programming menu.

1.  To assist with programming your ESC we offer an LED based program box that when connected will give a digital readout of the 

current Item being programmed and the value. It will also allow you to modify these settings right on the box. You can purchase 
this program box at your local hobby dealer as part number RDNA0032. The program box communicates with the ESC through 
the fan port. You must disconnect the fan and plug in the program box. Simply plug in the program box and program with normal 
sequence but using box instead of counting fl ashes and beeps. Remember to plug the fan back in when you are done. 

RDNA0032 Reaktor ESC Program Box

Turn OFF ESC and 

Transmitter

Press and hold the 

SET button then 

Turn ON the ESC

RED LED fl ashes 

indicating you are in 

program mode

GREEN LED fl ahes

1 time to set Item 1

Program Item 1:

Running Mode

RED LED fl ashes to indicate set 

value: 1-2, press button to cycle 

through available values

GREEN LED fl ahes

2 times to set Item 2

Program Item 2:

Drag Brake Force

Program Item 3:

LVC Threshold

Program Item N:

“Programmable Item”

RED LED fl ashes to indicate set 

value 1-8, press button to cycle 

through available values

RED LED fl ashes to indicate set 

value 1-6, press button to cycle 

through available values

RED LED fl ashes to indicate set 

value 1-X, press button to cycle 

through available values

GREEN LED fl ahes

3 times to set Item 3

Continue to cycle through available Programmable Items and set values as desired. We recommend you 

start with the default values and adjust only one value at a time to be sure the change has made the 

desired effect.

GREEN LED fl ahes

“N” times to set Item N

HOLD SET BUTTON

HOLD SET BUTTON (3 Seconds)

HOLD SET BUTTON (3 Seconds)

HOLD SET BUTTON (3 Seconds)

HOLD SET BUTTON (3 Seconds)

Turn OFF ESC a

t an
y time to confi

 rm setting,

 turn ON a

gain to 

begin using the new settings.

Programmable Items

(Blinks of GREEN LED)

Programmable Value (Blinks of RED LED), Black background indicates default settings

1

2

3

4

5

6

7

8

1.

Running Mode

Forward 

with Brake

Forward/

Reverse 

with Brake

2.

Drag Brake Force

0%

5%

10%

15%

20%

25%

30%

40%

3.

Low Voltage Cut-Off
Threshold

No

Protection

2.6V/

Cell

2.8V/

Cell

3.0V/

Cell

3.2V/

Cell

3.4V/

Cell

4.

Start Mode/Punch: Higher 
value is more aggressive

Level 1 

(70%)

Level 2

(80%)

Level 3

(90%)

Level 4 
(100%)

5.

Maximum Brake Force

25%

50%

75%

100%