9
Copyright@2015 HeliPal.com. All Rights Reserved
Radio Controller Parameters
If you reset your radio controller (AT9) setting, you can apply the setting below:
1)
Press and Hold the controller wheel (With wordings
“
PUSH
”) to unlock the manual. Press and Hold
Mode
Button to go into
basic menu
page
2)
[STK-MODE] = 2
(Stick Mode)
[LockScreen] = 30s
(Time to lock screen)
3)
[TYPE] = AIRCRAFT
4)
[SELECT] = 01
[NAME] = SRD-CC3D
(Any name you want)
5)
Go to
[AUX-CH]
->
ATTITUDE
, apply the setting below:
[CH] = CH5 [SW3] = SwG [SW2] = SwD
[STABL.] = 0% [STABL.] = 25% [STABL.] = 35%
[ARCO] = 50% [ARCO] = 75% [ARCO] = 100%
6)
[CH5] = ------- [CH6] = VrA [CH7] = VrC
[CH8] = VrD [CH9] = SwF [CH10] = SwA
7)
[1] [TIME] = 10:00
[1] [MODE] = UP
[1] [ON][1] = ST-THK (Using Throttle Stick to start the
timer)
[1][ON] [2] = 15% ( Move the indicator over the value, set
throttle stick to around 15%, Press and hold “Push” button
to recognize the throttle value and move the wheel to change
the arrow sign)
[1][RESET] [1] = SwH (Using Switch H to responsible for the
reset timer action)
[1][RESET] [2] = DOWN (Using Switch H’s down action to
reset the timer)
