21
Q-factor (Q-Factor)
This slide control is only active if you select the “Self-Define” characteristics. The slope for this
characteristics setting is fixed at -12 dB and there is the option of adjusting the Q-factor of the
high- or low-pass between 0.5 and 2.0 in increments of 0.1. The Q-factor effect is illustrated below
using the example of a high- and low-pass filter with a crossover frequency of 1000 Hz.
Fig. 5:
Q-factor effect for the high-pass
Fig. 6:
Q-factor effect for the low-pass