66 / 179
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
21.04.2020
Version 1.18.0
Installation
APS-90, APS-180 and APS-90-Outdoor-PoE
Mounting parameters
If the view in the visual range is impaired, the obstructed area can be defined.
■
Ensure that the area is sufficiently illuminated.
APS-90
APS-180
APS-90-Outdoor-
PoE
Mounting height
2.0 .. 6.0 m
(6.6 ... 19.7 ft)
3.0 .. 9.0 m
(9.8 ... 29.5 ft)
2.0 .. 6.0 m
(6.6 ... 19.7 ft)
Mounting pitch angle
α
-45° .. 0 .. 45°
Mounting yaw angle
β
-45° .. 0 .. 45°
Distance from the door,
optimal
30 .. 50 cm (11.8 to 19.7 in)
Lateral alignment
centered in the passage area
Consider the following parameters when positioning the device:
The device has an integrated tilt measurement, therefore there is no need to use an extra
angle measuring device. The pitch (Fig. 45 /
α
β
) angles allow values up
to 45°. Keep in mind that this maximum angle value is not very useful, because at the
camera edges you will see up to the horizon and small people may be obstructed by
bigger people. 30° is a more realistic suggestion as a useful maximum.
Fig. 45: Mounting position (angles)
The reference plane for the mounting height is the floor directly beneath the device. The
device can approximate measure it's own mounting height, if there is a big enough visible
floor area . Be prepared to use a distance measuring device as backup. Measure the
mounting height from the base to the optics.
