110 / 179
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
■
To activate the logging of events entering or leaving a zone, tick the
Zone Events
■
To activate the generation of the statistical values, tick the
Zone Statistics
checkbox
■
To change the interval during which the statistics are collected, select a
Completion
Interval
(Fig. 106 /1) from the drop-down list.
■
To activate the generation of object lists, tick the
Zone Object List
checkbox
■
Each object needs a minimum time in the zone to be placed on the object list. To
change this time set the
Min Dwell for Object List
■
To go back to the last saved settings click the
Reset
■
To save all the settings in the device click the
Save
6.7.3
Monitoring Filter
The device classifies objects as adult persons, persons up to 130 cm (children) and non-
person objects (such as shopping carts). These non-person objects can be either ignored
or monitored (as adult persons).
Fig. 107: Monitoring Filter
■
To suppress counting of shopping carts and other objects tick the
Ingnore non-person
objects
■
To go back to the last saved settings click the
Reset
■
To save all the settings in the device click the
Save
