•
Always operate blender with lid in place.
•
Always use the appliance on a secure, dry level surface.
•
Never place this appliance on or near a hot gas or an electric burner or where it could touch a heated
appliance.
•
Always remove the blade assembly before pouring contents from jar.
•
Be sure to switch off the appliance after each use. Make sure the motor stops completely before
disassembling.
•
Do not leave this appliance unattended during use.
•
To reduce the risk of injury to persons or property, never use this appliance in an unstable position.
•
Do not use outdoors.
•
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
•
CAUTION:
Never immerse in water, or unplug before inserting and/or removing parts.
•
CAUTION:
DO NOT OPEN LID UNTIL BLADES STOP.
•
Do not let the cord hang over the edge of a bench, table or to touch hot surfaces.
•
Do not operate product with damp or wet hands.
•
Close supervision is necessary when the appliance is being used near children or infirm persons.
•
The use of accessories not recommended by the manufacturer may cause injuries to persons.
•
This appliance is not intended for used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliances by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Do not operate the appliance other than for its intended use. This appliance is for household use only.
•
Do not operate the appliance by means of an external timer or separate remote-control system.
•
The installation of a residual current device (safety switch) is recommended to provide additional safety
protection when using electrical appliances. It is advisable that a safety switch with a rated residual
operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See
your electrician for professional advice.
