background image

Important Notes 

 

1.

 

The specified voltage must match the mains voltage. Use an adequate wire cross-section.  

2.

 

The appliance air inlet and outlet openings must not be obstructed in any way!  

3.

 

Never move the heater during operating, always unplug heater when not in use.  

4.

 

Never use the appliance if the appliance or cord is damaged. The appliance may only be opened up 

and repaired by authorized qualified personnel. 

5.

 

Installation of the heater on the wall MUST BE 1.8m high from the floor and the heater location 

MUST NOT be directly below or in front of a main power socket.    

 

Read and follow the instructions in this user manual even if you feel you are familiar with the product, and 

find a place to keep it handy for future reference. 

 

For your convenience record the complete model number (located on the product identification plate) and 

the date you received the product, together with your purchase receipt and attach to the warranty and 

service information. Retain in the event that warranty service is required. 

 

NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading 

tests. Normal use or the use of other recommended attachments may draw significantly less power. 

 

Important Safeguards 

 

When using any electrically powered product, basic safety precautions should always be followed, including 

the following: 

 

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT 

 

WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property: 

 

 

Always operate the product from a power source of the same voltage, frequency and rating as 
indicated on the product identification plate. 

 

Remove the unit from its packaging and check to make sure it is in good condition before using. 

 

Do not let children play with parts of the packing (such as plastic bags). 

 

Close supervision is necessary when the product is used by or near children or infirm persons. Do not 
allow children to use it as a toy. 

 

Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is 

dropped or appears damaged in any way. Return the complete product to the place of purchase for 

inspection, repair or replacement. 

 

Before unplugging the power cord, be sure to turn the power off. When touching the unit, be sure 
your hands are dry to prevent electrical shock. 

 

Ensure the cord is fully extended before use and arrange it so that it is not in contact with any part of 

the heater. 

 

In use, some parts of the heater are hot. When moving, hold the heater only by the handle provided. 

 

Do not use the heater in areas such as garages where petrol, paint or other flammable substances 

are used or stored. 

 

Do not use near or point the heater to furniture, animals, curtains or other inflammable objects. 
Keep combustible materials such as furniture, bedding and any other combustible materials at least 

1 metre from the front and sides, and from the rear of the heater. 

 

Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the cord so that it 

cannot be tripped over. 

Summary of Contents for CWH20NS









Reviews: