SLICING/CHIPPING:
1. First, assemble the driving shaft onto the motor base, ensure it is clipped into position.
2. Place the jar on the motor base and turn it clockwise until it locks into position. Ensure it is assembled in
place correctly; otherwise the appliance will not operate.
3. Insert the circle blade assembly into the driving shaft in the jar.
Note:
if you want to slice, ensure the surface with the slicing blade is upward. If you want to chip, ensure the
surface with the chipping holes face upwards.
4. Place the lid onto the jar and turn it clockwise until the tab of the lid clicks into the jar handle. Make sure it
is locked in position correctly otherwise the appliance will not operate.
5. Press the corresponding speed button according to your task.
Note: The slicing/chipping blade can slice/chip potatoes, onions, cucumbers, beetroot, apples,
carrots etc.
6. Use the pusher to feed food into the feeding funnel. The food shall be cut into a proper size suitable for
the feeding funnel (the length of food shall be less than 120mm). You can slice/chip up to 500g of food.
CAUTION:
The total operating time should not more than 3 minutes.
7. Press the “OFF” button and unplug the unit after processing. Remove the circle blade assembly by its hub.
Unlock the jar by turning it in anti-clockwise away from its base, and lift off. Empty the processed food.
CAUTION:
The circle blade assembly is extremely sharp, handle with care.
CLEANING
1. Disconnect the power supply before cleaning.
2. Empty the jar, dismantle all detachable parts and rinse them in warm soapy water. Extreme caution must
be taken when handling disks as they are very sharp. Then dry thoroughly.
3. Wipe the outside of base with cloth. Never immerse it in water as electric shock is possible to occur. Then
dry thoroughly. Ensure the interlock area is free of food particles.
NOTE: Some food may discolor the circle blade disc. This is normal and will not harm the plastic or affect
the flavor of the food. Rub with a cloth dipped in vegetable oil to remove any discoloration.
CUSTOMER SERVICE
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.