READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should always be followed, including the
following:
At GAF, we are very safety conscious when designing and manufacturing consumer products; however there is
an onus on the consumer to also exercise care and common sense when using any electrical appliance. Listed
below are precautions which are essential for the safe use of an electrical appliance:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or property:
Always operate the product from a power source of the same voltage, frequency and rating as indicated on
the product identification plate.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is dropped
or appears damaged in any way.
This unit is designed for indoor use only.
Do not allow any foreign object to enter the grille openings as this may damage the unit and/or the user.
Do not allow any ceiling insulation to cover any portion of the rear of the appliance.
Do not attempt to modify the appliance.
This unit is not suitable for use with exhaust ducting.
INSTALLATION
CAUTION: ANY ELECTRICAL WIRING MUST BE CARRIED OUT BY A LICENSED ELECTRICIAN.
DO NOT INSTALL IN AN AREA WHERE WATER MAY BE SPLASHED ON THE APPLIANCE.
1.
Check for hidden timbers and wiring above the installation area.
2.
Using the template as described over, mark the mounting hole on the ceiling. In order for the warranty to
be honoured the fan must be installed:
a.
At least 2.3M above the ground.
b.
At least 90cm from any hotplate and have at least 30cm clearance above the fan blades.
c.
At least 20cm distance from side walls (see fig 1).
d.
Ensure the power cord does not interfere with the fan blades.
e.
Ensure any ceiling insulation or frame does not obstruct the airflow.
f.
Clean the grille and blades regularly.
Summary of Contents for HBBF250EX
Page 4: ......
