3.
Cut the hole using a jigsaw, keyhole saw or hacksaw along the marked line.
4.
Remove the grille (simply pulls free of the frame) and connect the plug to the power outlet. Insert the fan
assembly into the opening. For ceilings 13mm or less use step a). For thicker ceilings use step b).
a)
Before inserting the fan into the opening, push the three bar clamps all the way out to hold the fan in the
ceiling. Push the fan into the ceiling opening and secure the exhaust fan by tightening the screws securely
(See Fig 2).
b)
Remove the three bar clamps. Use wood screws (not supplied) to secure the fan to the ceiling. Locate
screws in the 3 holes in the outer lip of the fan frame.
5.
Place the grille over the fan assembly and push up until it snaps into place.
6. Precautions must be taken to avoid the back-flow of gases into the room from an open flue of gas or other
open-fire appliances.
PLEASE NOTE:
For your convenience an arrow is displayed on the cover fascia highlighting easy
release.
CARE INSTRUCTIONS
Dirty fan blades and clogged grille drastically decrease the fan’s performance, working life and void the warranty.
Regular cleaning will ensure many years’ of trouble free operation. Switch the appliance off before removing the
grille.
GRILLE
Remove and wash in warm soapy water then rinse. A soft brush and sugar soap is recommended to remove
stubborn grease.
Dry thoroughly before refitting.
FAN BLADE
Wipe blade with a cloth moistened with the above solution.
CAUTION: NEVER IMMERSE THE MOTOR IN CLEANING SOLUTION OR ANY OTHER LIQUID.
SERVICE
Apart from grille and blade cleaning there are no user serviceable components in the appliance.
If repair is required, contact the dealer from whom you purchased your appliance, together with your proof of
purchase, for a replacement.
TEMPLATE
Check that no hidden timbers or wiring are in the area immediately above the hole.
This template will mark out a 240mm diameter hole for the 200mm fan and a 300mm diameter
hole for the 250mm fan.
Important Note
The supply cord cannot be replaced. If the cord is damaged the appliance should be rejected.
GAF Control (Sales) Pty Ltd
18-28 Taras Ave
Altona Nth
Vic. 3025
READ AND SAVE THESE INSTRUCTIONS
Summary of Contents for HBBF250EX
Page 4: ......
