CAUTION: To avoid of electric shock, you must always switch off and unplug the unit before cleaning.
CAUTION:
•
Select a suitable location for the unit. Always choose a safe location in accordance to the
safely recommendations outlined.
•
DO NOT SPILL OR ALLOW WATER TO COME IN CONTACT WITH THE CONTROL PANEL.
•
Do not overfill pass the MAX water line.
•
Do not allow the combined use of water and ice to overfill the water tank.
•
When moving the unit, do so with extreme caution; do not spill any water in the reservoir.
The unit should be moved slowly and in sideways direction.
•
Always keep the unit upright.
NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the rating label, and that the socket has an earth facility.
OPERATING INSTRUCTIONS
1.
Turn on the air cooler by pressing the On/ Speed button.
2.
Push the Water Tank
’s
Stop Button (7) to let the water tank out. Then you can add water into
the box.
Water Tank
•
Fill water/ice: Gently pull out the water tank, and fill water (or ice) to it.
Note: Water level will be in between the min and max water level line. Never overfill.
3.
When you want to clean the Water Filter Pad (8), please just push the cover clip to pull the cover
(9) out. Then take out the Water Filter Pad (8).
HINTS FOR BETTER COOLING
1.
Your Evaporative Air Cooler required a supply of fresh air. Place the cooler near an open window
or leave the door open in the room. Then open another outside window or door on the opposite
side of the room so you create “Swing through” ventilation. The cooler will not work properly in
a closed room.
2.
As an addition, place the cooler near the entrance to the room. The cooler will draw cool air
from other parts of the house and bring down the temperature further.
3.
Start your cooler when the room is still cool. You may leave it running all day. You will find that
this system works best and keeps the room cooler.
4.
Add cold water and ice to the water tank. Turn on the cool switch and the filter pad will become
damp. The air is drawn in through back panel across the filter pad to release cool clean air. It
may take a few minutes for the pad to become saturated.
5.
Since humidity changes from hour-to-hour and day-to-day; when it is too humid, you may use
your cooler as a fan. Just turn cooler on but do not turn on cool button.
CARE & CLEANING
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
