background image

 

Do not cover the grill, or operate in close proximity to curtains etc. 

 

The use of attachments or accessories not recommended or sold by the product distributor may 
cause personal or property hazards or injuries. 

 

This product is intended for normal domestic/household use only. 

 

Never leave a working appliance unattended, even for a short period of time – always switch it 
off. Please unplug the appliance from the power supply when not in use. 

 

Use this fan as described in this manual. Any other uses, not recommended by the manufacturer, 
may cause fire, electric shock, or injury to persons and may void the warranty. 

 

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 
supervision or instruction concerning the use of the appliance by a person responsible for their 
safety. 

 

The installation of a residual current device (safety switch) is recommended to provide 
additional safety protection when using electrical appliances. It is advisable that a safety switch 
with a rated residual operating current not exceeding 30mA be installed in the electrical circuit 
supplying the appliance. See your electrician for professional advice.  

 

Children should be supervised to ensure that they do not play with the appliance.  

 

Do not leave the fan running unattended. 

 

WARNING: If the supply power cord is damaged, the power cord must be replaced by the 
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 

 

This product has not been designed for any uses other than those specified in this booklet. 

 

CAUTION:  Never  insert  your  fingers  or  any  other  objects  (hair,  clothes,  utensils,  knives,  screw 
drivers  etc.)  into  the  openings  of  the  guard  or  close  to  the  blade  when  the  appliance  is 
connected to the power supply. 

 

CAUTION: DO NOT COVER the appliance in any way in order to avoid overheating and fire. 

 

CAUTION - RISK OF ELECTRIC SHOCK: To reduce the risk of electric shock do not open this device, 
there  are  not  serviceable  parts  for  customers.    Please  refer  any  maintenance  or  repair  to 
qualified personnel. 

 
 
 
 
 
 
 
 
 
 
 

SAVE THESE INSTRUCTIONS 

 
 
 
 
 
 
 
 
 
 
 
 

 
 

 

 

Summary of Contents for MDF30









Reviews: