background image

Please read and follow the instructions in this user manual even if you feel you are familiar with the product, 
and find a place to keep it handy for future reference. 
 
For your convenience record the complete model number (located on the product identification plate) and 
the date you received the product, together with your purchase receipt and attach to the warranty and 
service information. Retain in the event that warranty service is required. 
 
NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading 
tests. Normal use or the use of other recommended attachments may draw significantly less power. 

 

Important Safeguards 

 

When using any electrically powered product, basic safety precautions should always be followed, including 
the following: 
 
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT 
 
WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property: 

 

 

Always operate the product from a power source of the same voltage, frequency and rating as 
indicated on the product identification plate. 

 

Fully assemble the fan before switching on. 

 

The fan must not be used if the guards are not fastened according to instructions. 

 

Remove the unit from its packaging and check to make sure it is in good condition before using. 

 

Do not let children play with parts of the packaging (such as plastic bags). 

 

Close supervision is necessary when the product is used by or near children or infirm persons. Do not 
allow children to use it as a toy. 

 

Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is 
dropped or appears damaged in any way. Return the complete product to the place of purchase for 
inspection, repair or replacement. 

 

Before unplugging the power cord, be sure to turn the power off. When touching the unit, be sure 
your hands are dry to prevent electrical shock. 

 

Adjustable pole must not be extended past 1.1m high. 

 

Avoid making contact with moving parts. Never insert fingers, pencils or any other objects through 
the guards whenever the power plug is connected, especially while the unit is working.

 

 

Always place the fan on a stable, level surface when operating to prevent the fan from overturning. 
Do not run the power cord under carpet. Do not cover the power cord with throw rugs or runners. 
Route the power cord away from walking paths so that nobody can trip over it. The cable should be 
kept away from heat, sharp edges and oil. 

 

Your pedestal fan should be placed away from heat sources such as; radiators, gas/electric heaters 
and direct sunlight. 

 

Ensure that the fan is switched off from the supply mains before removing the guard. 

 

To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, 
moisture or any liquid other than those necessary for correct operation of the product. 

 

This product should not be used in the immediate vicinity of water, such as bathtub, washbowls, 
bathroom swimming pool etc. Where the likelihood of immersion or splashing could occur. 

 

Switch off and unplug from outlet when not in use, before assembling or disassembling parts and 
before cleaning. Remove by grasping the plug - do not pull on the cord. 

 

Be sure that no other high current appliances are plugged into the same circuit as your fan, as an 
overload can occur. 

 

Do not remove any fixed covers. 

 

Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire. 

Summary of Contents for PED75G









Reviews: