Care & Cleaning
To make cleaning easier, you can dismantle some parts of your fan.
1.
Switch the fan ‘Off’ and unplug the power supply before cleaning.
2.
Use only a soft damp cloth to clean the fan.
3.
Do not immerse the fan in water or any other liquids, and never allow water to drip into the motor
housing.
4.
Do not use gasoline, paint thinner or other chemicals to clean the fan.
5.
To clean the fan blade, use 2 screw drivers to disengage the hooks (8 hooks) holding the front grille
to the rear grille.
6.
Remove the front grille.
7.
Wipe the blade and grille.
8.
Check that the fan blade screw is tight.
9.
Reassemble the fan by snapping the front grille into place.
10.
Store the fan in its original box or cover the fan to protect it from dust. Store in a cool dry place.
Disposal
Environmental Protection
Waste electrical production should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice.
Loosen the rotating joint bolt to tilt the
fan head ‘Up’ or ‘Down’.