IMPORTANT
Please read and follow the instructions in this user manual even if you feel you are familiar with the product, and
find a place to keep it handy for future reference.
For your convenience, record the complete model number (located on the product identification plate) and the
date you received the product together with your purchase receipt, and attach to the warranty and service
information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading tests.
Normal use or the use of other recommended attachments may draw significantly less power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should always be followed,
including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:
•
Carefully read all instructions before operating your new product for the first time and keep handy for
future reference.
•
Remove and safely discard any packaging material and promotional labels before using the product for
the first time.
•
Before using, check that the voltage of the wall outlet corresponds to that shown on the rating plate.
•
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return appliance to the nearest authorized service facility for
examination, repair or electrical or mechanical adjustment.
•
Always ensure the appliance is switched OFF, prior to plugging into the power outlet.
•
If the supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent or a
qualified technician in order to avoid a hazard.
•
To protect against risk of electrical shock, do not put the motor unit into water or any other liquid. Do not
start the product or press the control button with wet hands. To disconnect, turn the
control to “Off”, then
remove plug from power outlet by grasping the plug, not the cord.
•
The water temperature should not be over 60°C when cleaning the product.
•
Close supervision is necessary when any appliance is used by or near children.
•
Avoid making contact with moving parts.
•
Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or
damage to the blender. A scraper may be used but must be used only when the blender is not running.
•
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. To
disconnect, turn any control to “off”, then remove plug from wall outlet by grasping the plug, not the cord.
•
To reduce the risk of injury, never place blade assembly on motor unit without the bottle properly
attached.
•
When removing the blender from the motor unit, wait until the blades have completely stopped.
