- 2 -
WHEN THE UNIT IS IN OPERATION, BE SURE NOT TO MOVE OR SHAKE IT IN ORDER
TO AVOID LIQUID BECOMING MURKY AND PERMANENTLY DAMAGED.
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS UNIT IS DAMAGED, IT SHALL
BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR SERVICE AGENT OR A
SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
THE UNIT SHOULD NEVER BE HEATED UP BY ANY OTHER MEANS NOR SHOULD IT
BE COOLED DOWN ARTIFICIALLY. NOT TO BE USED WHEN THE VASE IS CRACKED
OR DAMAGED.
USE ONLY R39, 25W, APPLIANCE BULB FOR REPLACEMENT BULB. VARIANCE IN
BULB SIZE OR WATTAGE WILL RESULT IN UNSATISFACTORY OPERATION, FIRE OR
BREAKAGE OF THE GLASS VASE.
THE SPACE ON THE TOP OF THE VASE IS PROVIDED FOR EXPANSION. DO NOT
BREAK THE SEAL OF CAP TO FILL IT WITH LIQUID OR SOLID. BREAKING THE SEAL
WILL VOID YOUR WARRANTY AND RUIN THE PRODUCT.
ALWAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE THAT IS AT ROOM
TEMPERATURE.
THE VESSEL AND BASE WILL BE WARM TO THE TOUCH IN OPERATION AND FOR
AWHILE AFTER THE UNIT HAS BEEN TURNED OFF/UNPLUGGED.
DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES. OPERATE THE
UNIT ONLY IN ROOM TEMPERATURE.
CONTAINER CONTENTS: 1.DISTILLED WATER 2. SHINING GLITTER
KEEP OUT OF REACH OF CHILDREN AND PETS.
- 1 -
•
OPERATION OR STORAGE OF THE UNIT IN DIRECT SUNLIGHT WILL CAUSE COLORS
TO FADE.
•
DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES. OPERATE IT ONLY
ON ROOM TEMPERATURE SURFACES.
•
THE UNIT OPERATES BEST AT ROOM TEMPERATURES BETWEEN 20-25 C (68-77 F).
DO NOT PLACE NEAR SOURCES OF HEAT OR COLD SUCH AS HEAT AND AIR
CONDITIONING VENTS.
•
THE UNIT IS DESIGNED TO OPERATE IN AN AVERAGE ROOM TEMPERATURE 20-25
C (68-77 F). MAKE SURE THE UNIT IS AT ROOM TEMPERATURE BEFORE STARTING.
•
THE UNIT OPERATES AT A VERY WARM TEMPERATURE AND THE VESSEL IS MADE
OF GLASS. KEEP THE UNIT OUT OF REACH OF SMALL CHILDREN AND PETS.
•
DO NOT ADD ANY FLUIDS OR SOLIDS TO YOUR UNIT. THE AIR SPACE AT THE TOP
OF THE VESSEL HAS BEEN PROVIDED TO ALLOW FOR EXPANSION.
•
USE ONLY FINE GLASS CLEANER AND A SOFT CLOTH TO CLEAN THE SURFACE,
ALWAYS UNPLUG IT BEFORE CLEANING.
•
ALWAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE.
•
PLACE THE CAP(C) ON TOP OF THE BOTTLE TO COMPLETE.
•
POSITION THE BODY (B) ON THE BASE (A) AND MAKE SURE
IT IS STEADY.
•
RE-CENTER THE BULB IF NECESSARY. IT IS IMPORTANT
THAT THE BULB IN THE UNIT’S BASE BE COMPLETETLY
CENTERED AND TIGHTENED. THE BULB AND SOCKET
MIGHT HAVE BEEN SLIGHTLY MOVED DURING SHIPPING.IF
SO, GENTLY PUSH THE SOCKET WITH YOUR FINGERS TO
RE-CENTER IT. MAKE SURE THAT THE UNIT IS
UNPLUGGED BEFORE TOUCHING IT.
•
USE ONLY 25 WATT TYPE R39 FROSTED BULB FOR
REPLACEMENT. VARIANCE IN BULB SIZE OR WATTAGE
WILL PRODUCE UNSATISFACTORY OPERATION, FIRE OR
BREAKAGE OF THE GLASS VESSEL.
•
ASSEMBLE THE UNIT ON A FLAT AND CLEAN SURFACE.
•
CAREFULLY UNPACK THE UNIT FROM THE BOX.
•
PLUG IN AND TURN THE SWITCH ON.
ASSEMBLY INSTRUCTIONS
：
CARE AND OPERATION:
