Helmer Scientific i.Series
®
and Horizon Series
™
Refrigerator - Pass-Thru
Service and Maintenance Manual
360429/A
5
Safety Precautions
1.5
Avoiding Injury
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by
the manufacturer.
• Do not damage the refrigerant circuit.
Review safety instructions before installing, using, or maintaining the equipment.
♦
Before moving unit, ensure doors are closed and casters are unlocked and free of debris.
♦
Before moving unit, disconnect the AC power cord and secure the cord.
♦
Do not open multiple, loaded drawers at the same time.
♦
Do not move a unit whose load exceeds 900 lbs/408 kg (226 models) or 1350 lbs/612 kg (458 models).
♦
Never physically restrict any moving component.
♦
Avoid removing electrical service panels and access panels unless so instructed.
♦
Keep hands away from pinch points when closing the door.
♦
Avoid sharp edges when working inside the electrical compartment and refrigeration compartment.
♦
Ensure products are stored at recommended temperatures determined by standards, literature, or good
laboratory practices.
♦
Proceed with caution when adding and removing product from the refrigerator.
♦
Use manufacturer supplied power cord only.
♦
Avoid risk of ignition by using only manufacturer supplied components and authorized personnel when servicing the unit.
♦ Using the equipment in a manner not specified by Helmer Scientific may impair the protection provided by the equipment.
♦
Ensure product is stored safely, in accordance with all applicable organizational, regulatory, and legal requirements.
♦ The refrigerator is not considered to be a storage cabinet for flammable or hazardous materials.
♦
REQUIRED:
Decontaminate parts prior to sending for service or repair. Contact Helmer or your distributor for
decontamination instructions and a Return Authorization Number.
