Document History
Revision
Date
CO
Supersession
Revision Description
A
17 JAN 2017*
12551
n/a
Initial release (all upright units with serial numbers 2035000 and greater; all undercounter units
with serial numbers 2036500 and greater).
B
15 JUN 2020
15413
B supersedes A
The use of safety precautions and symbols have been updated throughout the manual.
Updated Compliance section to reflect change in notified body.
* Date submitted for Change Order review. Actual release date may vary.
Document Updates
The document is furnished for information use only, is subject to change without notice and should not be construed as a
commitment by Helmer Scientific. Helmer Scientific assumes no responsibility or liability for any errors or inaccuracies that may
appear in the informational content contained in this material. For the purpose of clarity, Helmer Scientific considers only the most
recent revision of this document to be valid.
Notices and Disclaimers
Confidential / Proprietary Notices
Use of any portion(s) of this document to copy, translate, disassemble or decompile, or create or attempt to create by reverse
engineering or otherwise the information from Helmer Scientific products is expressly prohibited.
Copyright and Trademark
Copyright © 2020 Helmer, Inc. Helmer
®
, i.Series
®
, i.C³
®
, Horizon Series™, and Rel.i™ are registered trademarks or trademarks of
Helmer, Inc. in the United States of America. All other trademarks and registered trademarks are the property of their respective
owners. Helmer, Inc., doing business as (DBA) Helmer Scientific and Helmer.
Disclaimer
This manual is intended as a guide to provide the operator with necessary instructions on the proper use and maintenance of
certain Helmer Scientific products.
Any failure to follow the instructions as described could result in impaired product function, injury to the operator or others, or void
applicable product warranties. Helmer Scientific accepts no responsibility for liability resulting from improper use or maintenance of
its products.
The screenshots and component images appearing in this guide are provided for illustrative purposes only, and may vary slightly
from the actual software screens and/or product components.
Helmer Scientific
14400 Bergen Boulevard
Noblesville, IN 46060 USA
www.helmerinc.com
Part No. 360380-ENG/Rev B
