360142-D/D
16
i.Series® Models
6.4
Move Drawers, Shelves, and Baskets
Storage features.
!
CAUTION
►
Before moving drawers, ensure they are completely empty for safe lifting.
►
Maximum basket, drawer, or shelf load is 100 lbs (46 kg).
NOTE
Before moving storage components, protect stored items in freezer from extended
exposure to adverse temperature.
Remove a drawer or basket
1
Pull drawer or basket out until it stops.
2
Tilt the front of the drawer or basket upward.
3
Pull drawer or basket free of the slides.
Install a drawer or basket
1
Align end guides on drawer or basket with the slides.
2
Gently push drawer or basket into chamber until it stops.
3
Pull drawer or basket out until it stops; check for smooth operation.
Remove a shelf
1
With one hand, lift front edge of the shelf from the front brackets.
2
With the other hand, reach under the shelf and bump rear edge of the shelf upward to disengage rear
brackets.
Install a shelf
1
Insert shelf into chamber, placing it on brackets.
2
Gently bump rear edge of the shelf downward to engage brackets.
3
Pulling shelf forward gently; shelf should not disengage from rear brackets.
6.5
Move Slides and Brackets
Remove drawer slides
1
Using a screwdriver, remove front bracket retainers.
2
Tap front brackets upward to disengage standards.
3
Remove slides from standards.
Install drawer slides
1
Insert slides into standard at appropriate height.
2
Tap front brackets downward to engage standards.
3
Using a screwdriver, install front bracket retainers.
Remove shelf brackets
1
Using a screwdriver, remove front bracket retainers.
2
Tap front brackets upward to disengage standards.
3
Remove front brackets from standards.
