360137-D/D
11
i.Series® Models
Section II: i.Series
®
Models
7 Operation
7.1
Initial Start Up
1
Plug the power cord into a grounded outlet that meets the electrical requirements on the product
specification label.
2
Switch AC ON/OFF switch ON.
3
Switch backup battery switch ON.
NOTE
►
For models equipped with the optional Access Control, the backup battery is switched
on with a key switch.
►
The i.C³ monitoring and control system will take approximately two minutes to boot
up.
4
Select language.
NOTE
Active alarms are displayed on the Home screen. If an alarm condition other than High
Temperature occurs, refer to the service manual for troubleshooting.
5
If an alarm sounds, temporarily mute the alarm by touching the
Mute
button.
7.2
Change Temperature Setpoint
>
Touch + or – on spin box to change value.
NOTE
Default setpoint is -30.0 °C