background image

Helmer Scientific Platelet Agitator

Service Manual 

360391/A

3

About this Manual

1.1 

Intended Audience

This manual provides information on how to use the platelet agitator Pro. It is intended for use by end users of the platelet agitator 
and authorized service technicians.

1.2 

Model Reference

This manual covers all Pro Series platelet agitators which may be identified by size or model number.

1.3 

Intended Use

 Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the 

user will be required to correct the interference at his own expense.

Helmer platelet agitators are intended to provide controlled agitation required for the storage of platelet products.
The devices are intended to be operated by personnel who have procedures in place for meeting FDA, AABB, EU or any other 
applicable regulations for the processing and storage of platelet products.

1.4 

Safety Symbols and Precautions

Symbols and precautions found in this document

The following symbols are used in this manual to emphasize certain details for the user:

Task

  Indicates procedures which need to be followed.

Note

  Provides useful information regarding a procedure or operating technique when using Helmer  

Scientific products.

NOTICE

  Advises the user against initiating an action or creating a situation which could result in damage to 

equipment; personal injury is unlikely.

CAUTION

  Advises the user against initiating an action or creating a situation which could result in damage 

to equipment or impair the quality of the products or cause minor injury.

WARNING

 

 

Advises the user against initiating an action or creating a situation which could result in damage 

to equipment and serious personal injury to a patient or the user.

 

Authorized representative in the European Community

EC

REP

Summary of Contents for i.Series PF15-Pro





















Reviews: