Quickstart Guide PROFINET switch | Version 9 | 22.06.2020
5
4.2
Setup in the hardware-configuration
Following installation, the PROFINET switch can be found in the hardware catalog under “Other field
devices -> PROFINET IO -> Network Components -> Helmholz GmbH & Co. KG -> Helmholz PN-Switch”.
Add the “PROFINET-Switch, 4-port”, “PROFINET-Switch, 8-port” or “PROFINET-Switch, 16-port” device
to the project and connect it with your PROFINET network.
By calling up the object properties, you must assign the PROFINET switch a unique PROFINET name in
the project and check the IP address for plausibility.
The real device must later be assigned the same name as in the project.
