Quickstart Guide FLEXtra PROFINET-Switch | Version 1 | 17.09.2020
2
Content
1
Safety instructions ................................................................................................ 2
2
Introduction ......................................................................................................... 3
3
Preparing the PROFINET-Switch ........................................................................... 3
3.1
Connecting .................................................................................................................................. 3
4
Setup and use ....................................................................................................... 4
4.1
Install GSDML file ......................................................................................................................... 4
4.2
Setup in the hardware-configuration ............................................................................................ 5
4.3
Setting the port properties............................................................................................................ 6
4.4
Assign the PROFINET switch a name ............................................................................................. 7
4.5
Further configuration and diagnosis via the web interface ............................................................ 8
5
Diagnosis via LEDs ................................................................................................ 8
5.1
System LEDs ................................................................................................................................. 8
5.2
Ethernet LEDs P1 – P16 (RJ45) ....................................................................................................... 8
6
Function of buttons .............................................................................................. 9
7
Technical data ...................................................................................................... 9
1
Safety instructions
Target audience
This description is only intended for trained personnel qualified in control and automation
engineering who are familiar with the applicable national standards.
For installation, commissioning, and operation of the components, compliance with the
instructions and explanations in this operating manual is essential. The specialist personnel is
to ensure that the application or the use of the products described fulfills all safety requirements, including
all applicable laws, regulations, provisions, and standards.
Intended use
The device has a protection rating of IP 20 (open type) and must be installed in an electrical
operating room or a control box/cabinet in order to protect it against environmental
influences. To prevent unauthorized operation, the doors of control boxes/cabinets must be
closed and possibly locked during operation.
The consequences of improper use may include personal injury to the user or third parties, as well as
property damage to the control system, the product, or the environment. Use the device only as intended!.
