Quick Start Guide PN/CAN-Gateway CANopen®
10
10. LED status information
MODE
Off
No power supply or device defective
Blue on
PN/CAN-Gateway is correctly configured via PROFINET and
all CANopen® slaves are in Operational
Flashing blue
PN/CAN-Gateway is correctly configured via PROFINET and
at least one CANopen® slaves is in Pre-Operational or Stop or the gateway is not started.
Red on
No connection with PROFINET controller (PLC)
Flashing red
Connection with the PROFINET controller (PLC) exists, but a configuration error exists
CAN-RX
Flashing green
CAN frame is received without errors
Red
CAN bus error in the recipient or PN/CAN-Gateway hasn't been configured yet
CAN-TX
Flashing green
CAN frames are being transmitted
Red
Transmission not possible (e.g. false Baud rate, CAN bus disrupted)
or PN/CAN-Gateway has not yet been configured
