background image

Quick Start Guide REX 100 3G | LTE

10

Cyclic check whenever 

there is an Internet 

connection

1. Login via shDIALUP

2. Create/edit the REX 100 

    configuration and deposit

    it in the CTM

3. The configuration is 

downloaded and activated

4.2 Configuration Transfer Manager (CTM)

The Configuration Transfer Manager makes it possible to transfer a configuration 

to a REX 100 router once the router has established an Internet connection to the 

myREX24 portal. 

 

If the REX 100 unit has a connection to the myREX24 portal, it will check whether 

there is a new configuration available for its serial number. If there is one, it will load 

it automatically. This method is ideal for retroactive changes to the configuration.

Note:

 

-

  The CTM function is only supported as of version 3 of the dial-up software  

"shDIALUP". 

-

  In order to be able to transfer the configuration, the Configuration Transfer Manager 

needs an Internet connection established using a SIM card. If you are commissioning 

your REX 100 unit for the first time, this can be commissioned directly on the REX 100 

router through the "First Start" webpage.

4.2.1 Establishing an Internet connection through the "First Start" website

If you have not yet configured your REX 100 router using one of the other configura

-

tion methods (directly on the computer or using a USB flash drive), you can also 

establish an Internet connection for the commissioning directly with the REX 100 

router's web interface at the "First Start" website. 
If the REX 100 can already set up an Internet connection, please continue to chapter 

4.2.4 "Automatic download of the configuration" on page 12.
Commissioning via the "First Start" website presumes that the REX 100 can be ad

-

dressed in the local network under its default IP address. REX 100 routers come with 

a default IP address of 192.168.0.100 (subnet mask: 255.255.255.0).
In order to be able to reach the REX 100 router, the PC network adapter must also be 

set to the IP address space and subnet of the router. 

The device with serial number must be created in the myREX24 portal for successful 

commissioning.

Summary of Contents for REX 100 3G





















Reviews: