background image

Doc No: 7860263

4

O

5

6

7

1

2

3

+

Fn

Ch

10 s

4

O

5

6

7

1

2

3

+

Fn

Ch

10 s

4

O

5

6

7

1

2

3

+

Fn

Ch

10 s

4

O

5

6

7

1

2

3

+

Fn

Ch

10 s

625 ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

125

ms

Data is subject to change without notice. More information at: www.helvar.com

Enable IR Receiver

To enable the Infra-red receiver of a controller:

1.   Ensure the iDim Remote is in special function mode.

2.   Point the remote  a controller.

3.   Press and hold DALI 1 modifi er up and Fn key at same

      time for 10 secs.

Disable IR Receiver

To disable the Infra-red receiver of a controller:

1.   Ensure the iDim Remote is in special function mode.

2.   Point the remote at a controller.

3.   Press and hold DALI 1 modifi er down and Fn key at same 

      time for 10 secs.

Lock iDim Sense Mode Selector Ring

To lock the mode selector ring of an iDim Sense:

1.   Ensure the iDim Remote is in special function mode.

2.  Point the remote at the iDim Sense you wish to lock.

3.   Press and hold DALI 2 modifi er up and Fn key at same 

      time for 10 secs.

Note: When locked, the iDim Sense mode selector ring 

         can still be manually turned. However, the modes will 

         be ignored unless the mode selector ring is 

         unlocked.

Unlock iDim Sense Mode Selector Ring

To unlock the mode selector ring of an iDim Sense:

1.   Ensure the iDim Remote is in special function mode.

2.   Point the remote at the iDim Sense you wish to unlock.

3.   Press and hold DALI 2 modifi er down and Fn key at same 

      time for 10 secs.

iDim Sense will remain in the selected mode (and in user 

defi ned mode where applicable) until the mode selector ring 

is turned again. 

Special Functions using iDim Remote

iDim Sense LED Feedback

Transfer settings to iDim Sense using iDim 

Remote 

To transfer settings to iDim Sense using iDim Remote:

1.   Point the remote at a controller.

2.   Press OK and Fn key at same time.

Note: The following instructions require iDim Studio software to be installed on the PC that the iDim Remote and USB cable is connected. 

          For download information please see www.helvar.com

Advanced Confi guration with iDim Studio Software

Summary of Contents for iDim











Reviews: