8
EN
To detach the jug:
Take the jug by the handle and turn it clockwise until it
stops (with the two arrows lined up) and lift it upwards
(Figure 13).
CAUTION.
For safety reasons, the lid of the jug cannot be re-
moved or fitted when secured in the central unit.
Do not use force as this could damage part of the
safety element.
The jug must be first removed from the central unit
by turning it clockwise until it stops, with the jug
base arrow lined up with the central unit arrow, pri-
or to removing or fitting the lid (Figure 13).
Never activate the heating function when the jug is
empty.
Jug stand with attachment clamp
(Figure 14).
The stand is used to:
1. Fit the blades into the jug.
2. Secure the jug to the central unit:
3. Support the jug on any surface when it is hot to pre-
vent burns of any type. (Figure 15)
Blades
(Figure 16)
The blades contain two lateral pivots embedded in the
stand which are used to line them up and secure them
properly with the jug.
To remove the blades from the jug:
1. Turn the attachment clamp 180 º into the open posi-
tion and pull it from the jug stand, as indicated by
the arrows. (Figures 17 and 18).
2. Remove the blades from the jug, being careful not
to cut yourself (Figure 19).
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Summary of Contents for 226384
Page 35: ...35...
