7
4. Put the cover down and press front handle to lock the cover. – Fig. 2
5. Check the LED status of “vacuum” and the “sealing mode” to confirm depending on the
moisture status of packed items (extended/moist/dry) and desired vacuum pressure (Normal/
Gentle) according to the type of food.
Fig. 1
Fig. 2
Fig. 3
6. Then press Vacuum&Seal button, the unit start to vacuum and will seal the bag automatically.
– Fig. 3
NOTE: This product provides very high vacuum pressure
during vacuum packaging with a bag, in order to avoid
crushing of the delicate item by the high vacuum pressure,
observe the status of the vacuum pressure inside the bag
and switch the “MANUAL SEAL” button immediately when
the desired vacuum pressure is achieved. The pump will
stop and change to heat-seal the bag.
7. The vacuum packaging is done. Lift the handle to open
the cover and take out the packed bags. – Fig. 4
NOTE:
• For best sealing effect, it is better to let the appliance cool down for 1 minute before using
it again. Wipe out any excess liquid or food residue in the vacuum chamber after each bag
packaged.
• Do not seal one after another continuously to avoid overheat of the sealing element. The ma-
chine will reject if this “seal” button is activated within 15 seconds of the last activation.
• Your appliance can work only on the specific bags provided by us. Do not attempt to use other
bags not intended for vacuum packaging. .
• Cut the bag straight across with scissors to open a sealed bag.
• If you are not sure whether the bag is sealed properly, simply seal the bag again.
• Vacuum is NOT a substitute for the heat process of canning. Perishables still need to be refrig-
erated or frozen.
III. Vacuum package in a Canister & Vacuum Bowl and the vacuum hose (not supplied)
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Put the items into the canister and do not fill up too full so that the cover can be in good con-
tact with the canister bowl rim. Clean the cover rim of the canister and bottom seal gasket of
the canister cover.
Fig. 4
EN
