background image

7

Operation

•  Make sure the heating control knob is switched 

to the 0 position.

•  Connect the power plug to a suitable electrical 

power outlet.

•  Power ON the appliance by turning the 

Heating 

control

 knob to the desired setting (Full power/

Low power/Upper heating only). The power indi-
cator will be light up in green.

•  Place the sliced bread on the conveyor by using a 

tong (not supplied) to avoid danger of heat burn. 
Ensure the bread is evenly placed.

•   Rotate  the 

Speed control

 knob to adjust the 

speed of the conveyor & thus the browning even-
ness of the toasted bread.

•  When not in use, set the 

Heating control

 knob to 

the “0” position.

•  Unplug the appliance from the electrical power 

outlet.

•  Allow the appliance to cool down completely be-

fore cleaning or storage. 

Note

: Due to manufacturing residues, the appli-

ance may emit a slight odor. This is normal and 
does not indicate any defect or hazard. Make sure 
the appliance is well ventilated.

Cleaning and Maintenance

Attention

:  Always unplug the appliance from the electrical power outlet and let it cool down completely before 

cleaning and storage.

•  Clean the appliance regularly and any food resi-

dues removed.

•  

CAUTION!

 Never use any abrasive or hard objects 

for cleaning.

•  Clean the appliance with luke-warm water and 

a soft cloth.

•  Do not use water jet or steam cleaner for clean-

ing and do not push under the water.

•  No any parts can be cleaned in the dishwasher.

Parts 

How to clean

Remark

All accessories 
such as trays, etc.

-  Soak in warm, soapy water for about 10 to 20 minutes.
-   Rinse under running water thoroughly.

Dry all parts well at 
last.

External surfaces -  Wipe clean with a soft cloth and a little mild detergent. 

Make sure no water or moisture enters inside the of the 
appliance.

Storage

•  Always make sure the appliance has already 

been disconnected from the electrical power out-
let and cool down completely.

•  Store the appliance in a cool, clean place.

Summary of Contents for HND298268













Reviews: