Intelligence Aided Lifting Equipment
56
slowdown point).
Reset soft limit
Reset all soft limits set in this menu to “Invalid”.
Lifting speed
regulation
Speed setting
Set the maximum running speed of the handle speed,
suspension speed, unloading speed and homing speed.
Inching speed
setting
Set the running speed of the fast gear /slow gear of
inching function in the extended function.
Lifting sensitivity
Set the acceleration in the suspension mode, with [1-5]
corresponding to the minimum and the maximum
acceleration respectively.
No-load speed
setting
Enter into no-load deceleration function submenu
Speed setting
(submenu)
Handle speed
setting
Select the maximum running speed in the mode of
manual hold of equipment, with [1-10] corresponding to
the minimum and the maximum speed respectively.
Suspension speed
setting
Select the maximum running speed in the suspension
mode of equipment, with [1-10] corresponding to the
minimum and the maximum speed respectively.
Unloading speed
setting
Select the maximum running speed in the unloading
mode of equipment, with [1-10] corresponding to the
minimum and the maximum speed respectively.
Homing speed
setting
Select the maximum running speed under the homing
function of equipment, with [1-10] corresponding to the
minimum and the maximum speed respectively.
No-load speed
setting
(Submenu)
No-load speed
switch
Set the turning-on/turning-off of no-load deceleration
function;
No-load weight
threshold
The weight value based on which whether the setting of
no-load slowdown function is valid is judged.
No-load speed
adjustment
Speed gear used to set no-load deceleration.
No-load speed time
limit
Deceleration time when setting no-load deceleration.
Weighing
setting
Weight zero
position
Set the current weight value to “Zero”, which is similar
to the tare function.
The setting of the weight zero position is effective when
the actual weight is less than 60KG.
