Pressure Transmitters 050D series
Operating Instructions
- English - V1.0
PN-TI118-EN-14-1/19
Hengesbach GmbH & Co. KG
·
Schimmelbuschstr. 17
·
40699 Erkrath
·
Tel. +49 (0) 21 04 / 30 32-0
·
Fax +49 (0) 21 04 / 30 32-22
·
www.hengesbach.com
Construction
Electrical connection
- Standard:
M16x1.5 cable screw connection, nickel-plated brass (stainless steel available on
request)
- Optional:
M12x1 round plug-in connector, nickel-plated brass (stainless steel available on
request)
- Optional:
angle plug acc. to EN 175301-803
- Optional:
reference cable
Process connection
- Membrane, flush-welded on the front, CrNiSt, other materials available on request
- EHEDG type EL-ASEPTIC CLASS I, certified connection system PZM /
with press screw M38x1.5 and elastomer sealing
- Process seal EPM (FDA) (temperature range: -20...+150°C)
- Process seal FPM (FDA) (temperature range: -40...+200°C)
Materials
- Field housing / lid:
CrNiSt 1.4301 (304)
- Housing seal:
FPM (Viton
®
)
- Pressure compensation element:
polyamide
- Process connection / connection adapter:
CrNiSt 1.4404 (304)
- Process membrane:
CrNiSt 1.4435/1.4404 (316L)
- Reference cable, 5-wire with reference tube:
PUR (recommended: 80 m maximum)
Filling fluid
silicon oil (FDA)
Display and operation
Display
multiple-colour status LED
Operation
2-key concept
Auxiliary energy resources
Power supply / burden
12...30V DC, max. burden: (V
supply
– 12V) / 22mA
16
Dimensional drawings and ordering information
Dimensional drawings and ordering information are provided on the data sheet.
