6
5) Press key
M+/SAVE
to save after changing and return to parameters choosing. While
Press key
ZERO/ESC
to return without saving.
6) Press key
ZERO/ESC
again to return to weighing mode.
Note: In the parameter setting mode, press the numeric key to choose the parameter
directly.
5-2 Parameters
1)
SET00
internal code checking
2)
SET01
backlight modes shifting
Options are On, OFF, and AUTO
= Backlight
= No backlight
=
Auto-on after getting a stable weigh data or any key is pressed. But auto off after N
seconds (N=2s, 5s, 10s, 20s, ever) with no action.
(ever=the backlight lasts forever with more than 9d placed on the pan) when it is stable.
3)
SET02
current using units setting (for weighing window and unit weight window)
options are :
kg kg
，
kg g
，
g g
，
lb lb
E.g. When Kg, G is selected, means weighing window current using unit is kg and unit
weight window current using unit is g
How to set current using units?
When parameter SET02 UNIT is selected, press
SMPL
to choose the desired unit,
press
M+/SAVE
to save the setting , then press
e
/MR
or
TARE/
f
to advance to next
parameter setting.
4)
SET03
zero range setting: d0, d1, d2, d3, d4, d5.
d0 (one division) , d1 (2 divisions), d2 (3 divisions), d3 (4 divisions), d4 (5 divisions) and
d5 (6 divisions)
5)
SET04
whether to save the upper & lower limit of quantity checking:
on, off
OFF = previously set quantity checking values are not retained when the unit is turned on.
ON = previously set quantity checking values are retained when the unit is turned on.
6)
SET05
stable weight checking setting: on, off
On: it starts checking weight when the weight and quantity are within the checking range
Summary of Contents for CYD-C8+-15K
Page 22: ...21 ...
