Hengx CYD-W8+-15K, Manual

                                                                                                                                                                                                  6     

seconds (N=2s, 5s, 10s, 20s, ever) with no action. 

Ever=

 It is always on when the weights 

over 9e 

On

：

  Backlight on 

3. 

P02: 

  current using units setting 

Init

 : Press key

 Unit 

to

select the default unit when powering on the scale

:

 pcs, 

斤

, lb. oz, 

g, kg, final .(final=keep the final being used unit when power off ) 

Use: 

Press key

 Unit 

to select the weighing unit. 

on

：

 Enable the unit 

 off

：

 Disable the 

unit 

4. 

P03: 

  zero range setting: d0, d1, d2, d3, d4, d5. 

d0 (one division) , d1 (2 divisions), d2 (3 divisions), d3 (4 divisions), d4 (5 divisions) and d5 

(6 divisions) 

5. 

P04: 

 Hold function 

HoLd 0

：

no hold function 

HoLd 1

：

  Peak hold. Press any key to release 

HoLd 2

：

  Hold after stable. Press any key to release 

HoLd 3

：

  Hold after stable. Release after moving away the article. The hold value is based 

on the current value and its range could be set in sub menu. Accumulation hold function is 

available, that is you could add article after hold the first value. 

HoLd 4

：

 Press key 

HOLD/LO/-

 to hold. Press any key to release 

Sub menu for Hold 3:    INF (default: infinity) /10 /20 /50 /100 /200 /500 /1000 2000 /5000 

/10000 /20000 /50000 

H=current hold value, R=hold value range, d= division, W= actual weight 

Keep to hold the value when |W-H|<=R*d, or the scale will exit the hold function. The scale 

will cancel the hold function when empty the weighing pan, if choose INF setting. 

6. 

P05: 

  whether to save the upper & lower limit of quantity checking: on, off 

OFF = previously set quantity checking values are not retained when the unit is turned on. 

ON    = previously set quantity checking values are retained when the unit is turned on. 

7. 

P06: 

 Check weighing function 

on:

 Check weighing under the condition that the weight is within the limits and the stable 

indication appears 

off: 

Check weighing under the condition that the weight is within the limits 

8. 

P07: 

  Check Weighing buzzer beep 

Hi

：

  There will be a warning sound when the weight of articles exceeds the upper limit, and