Product Installation and Key Points
The installation for Smart Handle is the same as normal handles.
Please note the following:
1. Please check if there are 38mm back-to-back screw holes in the lockbody,
otherwise replace the lockbody.
2. Please choose the right product according to the opening direction of the door.
Make sure the handle with power button is installed on the outside of the door.
3. Please install back-to-back bolt on the outside of the door when installing
back-to-back screws.
4. Carry out the assembly with the door open.
5
Bolt
Screw
38mm
Outdoor
Indoor
