Buttons, Installation and Replacement of the Battery
The product uses two CR2 disposable Lithium batteries. Remove the battery
tag to activate the Smart Handle for initial use.
Please use the Hex key provided to open the battery lid on the end of the door
handle, and follow the diagram below for battery installation or replacement:
Power Button
Caution
● When the product or App signals low battery warning, please replace the
battery to avoid battery leakage and damage or unable to unlock the product.
After warning signal appears, theoretically the door can still be unlocked for
about 50 times.
● Use CR2 batteries when replacing. Do not use batteries in other specications.
● Pay attention to the correct polarity when replacing the batteries.
● Always replace discharged batteries with new batteries.
Battery Safety Alert
● CR2 Lithium battery is disposable. Do not charge it to avoid re or bums.
● Do not disassemble, heat or burn the battery.
● Keep it out of reach of children to avoid hazard.
● Please dispose the battery in accordance with local laws and regulations.
C R 2
C R 2
Battery
6
Lid
Hex key
Battery
Pairing
The rst registered user using the ID QR code in this manual will be set as the
Administrator.
Product Usage Guide
