11 of 12
Instruction handbook
Version 1.0 · 23.12.17
EN
9) MAINTENANCE AND REPAIR
Notices
WARNING Risk of injury due to acci-
dental actuation of the dispenser and/
or opening of the device!
Always disconnect the compressed air supply from
the dispenser during maintenance and repairs.
Never open or dismantle the device.
For maintenance and repair work, contact the local
Henkel service partner.
CAUTION
Risk of injury from incor-
rect maintenance/repair!
The pneumatic driving unit (item (13) in
figure
{B}
on page II) may never be opened. Contact the
service partners of Henkel for maintenance and repair
of the pneumatic driving unit (for address list given at
the back).
.
NOTICE
Risk of damage due to incorrect mainte-
nance and cleaning!
Always keep the dispenser clean.
Never use any corrosive cleaning agents for clean-
ing the surface of the device (do not use products con-
taining silicone).
Spare part ordering information
When ordering spare parts, please provide the following
information:
• Serial number
• Device type
• Article description / spare parts number, see
"3) Scope of delivery" on page 6 and figure
{A}
10) TECHNICAL DATA
For dimensions refer to figure
{D}
on page II:
All maintenance and repairs may only be
carried out by sites authorized by the manu-
facturer and exclusively by qualified and suit-
ably trained personnel (refer to the address
list at the back).
Operating pressure
700 kPa (7 bar) (100 psi) max.
Compressed air
supply
800 kPa (8 bar) (120 psi) max.
Compressed air
quality
ISO 8573-1:2010 [2:4:2]
Sound level
107 dB(A)
Recommended op-
erating temperature
+5°C to +40°C
Relative air humidity
30% to 80% RH
(non-condensing)
Transport and stor-
age temperature
0°C to +40°C
Pressure adjust-
ment
Infinitely variable
Weight
4.0 kg
