•
The power cable must be free at all times, and nothing may be placed on it.
•
Immediately replace the power cable if damaged.
5.3 Prior to the First Use
See Vacuum Pump maintenance on page 28 for more information how to perform these steps.
Prior to the first use, the following steps must be performed:
Failure to do so may result in unrepairable damage to the machine.
1.
Check the oil sight glass to see if the amount of oil in the pump is sufficient.
2.
Optional: If the amount of oil in the pump is insufficient, refill it.
3.
Start up the machine. See Operation on page 19 for more information.
4.
Run the pump cleaning programme before using the machine for the first time.
Installation 18
