Seal bar
10
User manual Compact Eco-range
4 SEAL BAR
•
Clean the sealing and counter bars daily to ensure optimum sealing of the packaging material. Use
a dry cloth for this purpose.
•
Check the condition of the sealing wires regularly. They should be free of kinks and should be
tightly strung on the sealing bar. For flawless operation the Teflon tape must be free of damage.
•
If the sealing wires or the Teflon tape are damaged, replace them immediately.
•
Check the counter bar. This is made of silicone which generally has a long operational life and
therefore does not need replacing often. However, if parts of the beam are scorched, replace the
silicone strip immediately.
•
Ensure that spare sealing wires and Teflon tape are always kept in stock.
4.1 Replacing the seal wire and teflon tape
Removing of old materials
1. Remove the seal bars by pulling these up.
2. Remove the old teflon tape (5).
3. Unscrew the hexagon socket screws (4)
4. Check if the tightening springs (2 & 3) at the end of the bars are present. The tightening springs are
necessary to catch up the expansion of the wires during the heating process.
5. Remove the seal wire (6)
POS
Description
1
Beam
2
Spring
3
Screw
4
Hexagon socket screw
5
Teflon tape
6
Seal wire
Fig. 4-1
