COATS 1000/1000D Wheel Balancer • v
Owner’s Responsibility
To maintain machine and user safety, the responsi-
bility of the owner is to read and follow these instruc-
tions:
•
Follow all installation instructions.
•
Make sure installation conforms to all applicable
Local, State, and Federal Codes, Rules, and
Regulations; such as State and Federal OSHA
Regulations and Electrical Codes.
•
Carefully check the unit for correct initial function.
•
Read and follow the safety instructions. Keep
them readily available for machine operators.
•
Make certain all operators are properly trained,
know how to safely and correctly operate the unit,
and are properly supervised.
•
Allow unit operation only with all parts in place
and operating safely.
•
Carefully inspect the unit on a regular basis and
perform all maintenance as required.
•
Service and maintain the unit only with authorized
or approved replacement parts.
•
Keep all instructions permanently with the unit
and all decals/labels/notices on the unit clean and
visible.
•
Do not override safety features.
Definitions of Hazard
Levels
Identify the hazard levels used in this manual with
the following definitions and signal words:
DANGER
Watch for this symbol:
It Means: Immediate hazards, which will result in
severe personal injury or death.
WARNING
Watch for this symbol:
It Means: Hazards or unsafe practices, which could
result in severe personal injury or death.
CAUTION
Watch for this symbol:
It Means: Hazards or unsafe practices, which may
result in minor personal injury or product or property
damage.
Watch for this symbol! It means BE ALERT! Your
safety, or the safety of others, is involved!
CAUTION
WARNING
DANGER
Safety
