Important: Always read and follow the information box instructions.
• 9
Control Panel Function and Review
Figure 13 - Control Panel Feature Reference
Weight Display Windows
Mode LED Indicators
Left Weight Position LED Bars
Right Weight Position LED Bars
Direct Select™ & Wheel Cross-section Diagram
Information Box
Balancer Options
Keypad Group
Instructional Panel
Control Panel Quick Reference
If you select/press …
a Direct Select Weight key (Clip 1,
T1-Tape, Patch Static, T2-Tape, T3-
Tape, or Clip 2)
the T2-Tape key
the Dynamic/Static key
the Behind Spoke key
the Spoke 1/Spoke 2 key
a Wheel Dimension key (A, D, or W)
the Next key
the Stop & Exit key
hold Shift and press 1
hold Shift and press 4
hold Shift and press 5
hold Shift and press 6
hold Shift and press 7
hold Shift and press 8
hold Shift and press 9
Then …
on the Wheel Cross-section diagram, the activated weight location LED
illuminates.
the laser LED illuminates; the Laser Guided Operation™ mode activates.
additonal balance modes may be accessed. For additional information, see
Balance Options, page 11.
the LED illuminates indicating the mode is on.
the LED illuminates indicating the activated spoke location.
enter wheel data manually using the “numbered” keys.
additional functions or instructions may be accessed.
a measurement cycle or function is ended.
the Calibrate Machine mode is activated.
either 0.25-ounce Standard roundoff or 0.50-ounce RV-Lite Truck (RV mode
LED illuminates) is toggled on.
the Match Balance LED illuminates indicating the mode is on.
either the 0.25-ounce or 0.01-ounce weight increment is toggled on.
either the Operator A or the Operator B mode LED illuminates to indicate
the active operator memory.
Hood Start is turned On or Off.
either ounce or gram weight measurements is toggled on.
