background image

Model EEG-241, 242, 243, 244

25

Aug. 2014

Polish Duration (SP-9)

Press 

 button and “SP-9” and  “POLISH TIME” flash in the 

left display.   Press the ▲ or ▼ , or use product buttons, to 

change the polish time, from 0 to 10 minutes.

Change Filter Pad Reminder Time (SP-10)

Press 

► 

button and “SP-10  “CHANGE PAD’ REMINDER” 

flash in the left display.   Press the ▲ or ▼ , or use product 

buttons, to change the time, from 0 hours to a maximum of 100 

hours.

Clean-Out Time (SP-11)

Press ► button and “SP-11 CLEAN-OUT TIME” flashes in  

the left display.   Press the ▲ or ▼ or use product buttons, to 

change the time from 0 to 99 minutes.

Clean-Out Temperature (SP-12)

Press ► button and “SP-12 CLEAN-OUT TEMP” flashes in  

the left display.   Press the ▲ or ▼ or use product buttons, to 

change the temperature from 0 to 195

F (90

C).

Cooking User IO (SP-13)

Press 

 button and “SP-11” and  “COOKING USER IO” flash 

in the display.   Press the ▲ or ▼ buttons to choose “SHOW

-

PREV” or “SHOW----”.  

 

Setting SP-11 to SHOWPREV means after a cook cycle the 

display shows the last menu item cooked.  SHOW---- means 

after a cook cycle “----” shows in the display and a menu item 

needs selected before starting the next cook cycle.

Number of Baskets (SP-14)

Press ► button and “SP-14 NUMBER OF BASKETS” flashes 

in the left display.   Press the ▲ or ▼ buttons to choose 2 or 4 

baskets per well.

Cooking Indicator (SP-15)

Press ► button and “SP-15 SHOW COOKING INDICATOR” 

flashes in the left display.   Press the ▲ or ▼ buttons to choose 

YES, and during a cook cycle, “*” shows which timer is count-

ing-down.  Choose NO and “*” will not show during a cook 

cycle.

5-1.   SPECIAL PROGRAM 

MODE (Continued)

Summary of Contents for EVOLUTION ELITE EEG-241


































































Reviews: