Model MPC-1L, MPC-22, MPC-554
2-1
Oct. 2018
FM06-038-B
SECTION 2. SPECIAL PROGRAMMING MODE
2-1. INTRODUCTION
This mode records historic information on the holding cabinet
and operator performance, which could help in troubleshooting
a problem.
To access Special Programming Mode, perform the following
procedure:
1. Turn the unit power switch to
OFF
.
2. Press and hold the program button as you turn the power
switch to
ON
.
“
SPrg
” displays.
2-2. ACCESSING SPECIAL
PROGRAMMING MODE
2-3. ENTERING PASSWORD
After accessing Special Programming Mode, “
CodE
” displays
and then “
0 - - -
” displays.
1. Use the
UP/DOWN
buttons once to increment the number
to
1
.
2. Once the correct number displays, press the
P button
to
select the value and continue to the next number.
3. Use the
UP/DOWN
buttons once to increment the number
to
2
and press the
P button
.
4. Use the
UP/DOWN
buttons once to increment the number
to
3
and press the
P button
.
5. Use the
UP/DOWN
buttons once to increment the number
to
4
and press the
P button
.
Special Programming Mode has been activated.
If an incorrect value is entered, “
bad
” and “
CodE
” alternate
on the display. Press any button to resume normal mode.
P
READY
READY
READY
®
PASSWORD = 1234
