INPUT GAIN
The INPUT GAIN control is to accommodate a variety of instrument outputs.
There is no one correct input gain setting, so the input gain control setting
should be experimented with in concert with the volume control setting for the
best results for any given application. For higher output pickups, active pickups,
condenser mics, or effect devices, the input gain may be reduced to avoid un-
wanted distortion. For lower output devices, such as piezo-electric transducers or
dynamic mics, the input gain may be increased to maximize overall output. Each
application will be different, so start with the control at 12:00 and go from there.
INPUT JACK
The Bud has a 1⁄4”/XLR combo INPUT jack on each channel. This jack may be
used to plug in a standard 1⁄4” instrument cable or an XLR cable. The XLR is
unswitched 48-volt phantom powered, so refer to the device manufacturer to
confirm compatibility.